How To Use A Hydrogen Absorber

1. Place the household hydrogen absorber on the table, plug it in, and when the indicator light turns on, it is considered normal. Then open the lid of the hydrogen absorber and use your fingers to unscrew the circular lid in the middle (water filling lid).
2. Open the bucket of purified drinking water, align it with the water inlet, pour in purified water, click the start button, and the water shortage button on the hydrogen absorber LCD screen will turn from bright to dark, indicating that the water addition is complete.
3. After adding water, screw in the water injection cap and cover the top cover of the machine.
4. Facing the display screen of the household hydrogen absorber, click on the switch (which has a power light). The button on the right is marked with a small character, and you can click to select the single or double hydrogen absorption mode. The left button is the time button. Click to increase the time (30 minutes each time, up to a maximum of 120 timed minutes).
5. According to your own choice of single and double suction mode, take the nasal cannula and find the blue topped humidification cups on both sides of the hydrogen absorber. Insert the long end of the nasal cannula into the humidification cups.
6. The last step is to set the time, bring a nasal cannula, sit or lie down, find your favorite position, and your journey of hydrogen absorption begins.